Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Discs on a KTM XC 300

Model: Ktm Xc 300
Part: Clutch

Video tutorial

This guide outlines the steps necessary to remove and replace the clutch discs on the KTM XC 300 two-stroke enduro bike, following the instructions below. First, drain the transmission oil by unscrewing the drain bolt located under the engine; then, unscrew the fastening screws on the sides of the clutch cover to remove it, as shown in the video.

Next, unscrew the screws of the clutch pack, then remove the discs; install the new clutch discs, alternating between the cork and metal ones, following the video tutorial to the end!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How do you replace the clutch of the KTM XC 300?
How do you replace the clutch of the KTM XC 300?
Xc 300 To replace the clutch of the KTM XC 300, you need to loosen the screws that secure the clutch cover on the right side of the bike: once this cover is…
Oil Change for the Ktm XC 300 Gearbox
Oil Change for the Ktm XC 300 Gearbox
Xc 300 Follow these instructions to perform the routine maintenance service by replacing the gearbox and clutch oil on the Ktm XC 300. First, warm up the en…
How to Replace the Coolant in the KTM XC 300
How to Replace the Coolant in the KTM XC 300
Xc 300 Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start b…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos