Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 790
Part: Brake rotors

Below, we will see how to remove and replace the brake discs (front and rear) on a KTM Duke 790. First, place the motorcycle on a stand to lift the wheels off the ground. Then, unscrew the fixing bolts of the brake calipers, disconnecting the speedometer sensor as well, and subsequently remove the central axle of the wheel to take it off. At this point, unscrew the bolts of the front brake discs, replacing them with new ones. Secure them properly with the original bolts, applying the same procedure for replacing the rear brake discs!

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on a KTM Duke 790
Duke 790 In this video, we will see how to disassemble and replace the front brake pads on a KTM Duke 790, following the instructions below. First, remove the…
How do you replace the exhaust pipe of the KTM Duke 790?
How do you replace the exhaust pipe of the KTM Duke 790?
Duke 790 It will be possible to replace the exhaust that is installed on the KTM Duke 790 by loosening the screws that fix the terminal to its housing, on the…
How to Replace the Exhaust on a KTM Duke 790
How to Replace the Exhaust on a KTM Duke 790
Duke 790 To replace the exhaust on a KTM Duke 790, you need to loosen the screws that secure it to its housing, located near the side of the rear mudguard: on…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos