Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on the KTM Super Duke 1290 R, loosen the bolts securing the seat so it can be completely removed. After removing the seat, you will have access to the screws holding the fuel tank at the front of the bike. The tank must be removed from its housing by disconnecting the connectors and loosening the securing screws. Once the tank is completely removed, you will have access to the filter box underneath. Open it by unscrewing the bolts that secure the cover, allowing you to pull out the filter inside and replace it with a new one.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a KTM Super Duke 1290
How to Replace the Air Filter on a KTM Super Duke 1290
Super Duke 1290 R In this tutorial, you will learn how to disassemble and replace the air filter of the KTM Super Duke 1290 engine in simple and quick steps. First, re…
How to Replace the Coolant in a KTM Super Duke 1290
How to Replace the Coolant in a KTM Super Duke 1290
Super Duke 1290 R Follow the main instructions on how to drain and replace the coolant or antifreeze in the KTM Super Duke 1290 motorcycle. First, place your bike on a…
How to Replace the Exhaust on the KTM Super Duke 1290 R?
How to Replace the Exhaust on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the exhaust on the KTM Super Duke 1290 R, loosen the screws securing the plastic protection panel located at the bottom of the exhaust. On…

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos