Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to replace the front brake pads on a KTM Adventure 790 R, a very straightforward and quick operation. First, position yourself in front of the brake in question, then unclip the two indicated clips, unscrew the two pins using an Allen key, and remove them from the caliper. Next, remove the metal cover, take out the old pads, and clean any dirt residue inside the brake. Finally, insert the replacement pads and reassemble everything by following the reverse procedure.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the fuel tank of the KTM Adventure 790
How to disassemble the fuel tank of the KTM Adventure 790
Adventure 790 R Today we are going to discover the process of disassembling and replacing the fuel tank of the KTM Adventure 790 motorcycle, as well as the Adventure…
How to Change the Engine Oil in a KTM Adventure 790
How to Change the Engine Oil in a KTM Adventure 790
Adventure 790 R As seen in this tutorial, changing the engine oil in a KTM Adventure 790 is a very simple and quick operation. Before proceeding, wait for the engine…
How do you replace the exhaust pipe of the KTM Adventure 790 R?
How do you replace the exhaust pipe of the KTM Adventure 790 R?
Adventure 790 R In order to replace the exhaust pipe of the KTM Adventure 790 R, you need to loosen the screws that secure the exhaust terminal to its housing, so th…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos