Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a KTM Duke 390?

Model: Ktm Duke 390
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil in a KTM Duke 390, a very simple and quick operation to be performed every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath the motorcycle, locate the drain hole bolt, and unscrew it with an Allen key. Next, unscrew the second bolt, remove the secondary filter, and clean it of any dirt residue.

At this point, open the housing of the main filter, insert the replacement, reassemble everything, and pour in the new oil through the designated hole.


Updated on 30 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a KTM Duke 390?
How to Change the Engine Oil in a KTM Duke 390?
Duke 390 In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple operation. First, wait for the engine to cool completel…
How to change the engine oil in the KTM Duke 390?
How to change the engine oil in the KTM Duke 390?
Duke 390 In this tutorial, learn how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, wait for the engine to cool down …
How to Change the Engine Oil in the KTM Duke 390?
How to Change the Engine Oil in the KTM Duke 390?
Duke 390 This tutorial shows how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool enough, the…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos