Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on a KTM RC 390

Model: Ktm Rc 390
Part: Headlight bulb

Video tutorial

In this tutorial, you will learn how to replace the front headlight bulbs on a KTM RC 390, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, remove the two side fairings by unscrewing all the indicated screws with an Allen key. Next, grasp the bulb holder, rotate it slightly counterclockwise, and pull it out of the housing. At this point, disconnect the power connector, fit the replacement bulb, and reassemble by following the reverse procedure.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on a KTM RC 390?
How to Replace the Headlight Bulbs on a KTM RC 390?
Rc 390 In this tutorial, you can see how to replace the headlight bulbs on a KTM RC 390, a very simple and quick operation. First, ensure that the key is no…
Guide to Replacing the Brake Pads on a KTM RC 390
Guide to Replacing the Brake Pads on a KTM RC 390
Rc 390 In this guide, you will learn how to disassemble and replace the front and rear brake pads on the KTM RC 390 motorcycle. First, place the motorcycle …
How to Change the Engine Oil in a KTM RC 390?
How to Change the Engine Oil in a KTM RC 390?
Rc 390 As seen in this tutorial, changing the engine oil in a KTM RC 390 is an extremely simple and quick operation. First, wait for the engine to cool down…

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos