Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Rc 390
Part: Headlight bulb

In this tutorial, we can see how to replace the front headlight bulbs in the KTM RC 390, an extremely simple and quick operation. First of all, make sure that the key is not inserted, in order to work in complete safety, then locate the bulb holder located on the back of the headlight in question, grab it and remove it by rotating it slightly counterclockwise. Next, disconnect the power connector, connect the new bulb and install it following the exact reverse procedure. Finally, repeat the operation on the opposite side, if necessary.

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the KTM RC 390?
How to Replace the Front Brake Pads on the KTM RC 390?
Rc 390 In this tutorial, you will learn how to replace the front brake pads on the KTM RC 390, a task that is extremely simple and quick. First, position yo…
How do you replace the front brake pads of the KTM RC 390?
How do you replace the front brake pads of the KTM RC 390?
Rc 390 In order to replace the front brake pads of the KTM RC 390, you will need to loosen the screws that secure the brake caliper to the corresponding dis…
How do you replace the front brake pads of the KTM RC 390?
How do you replace the front brake pads of the KTM RC 390?
Rc 390 It will be possible to replace the front brake pads of the KTM RC 390 by loosening the screws that secure the brake caliper corresponding to the disc…

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos