Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a KTM RC 390?

Model: Ktm Rc 390
Part: Battery

Video tutorial

In this tutorial, we will see how to replace the battery in a KTM RC 390, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, remove the passenger seat and, by unscrewing the two fixing bolts, also remove the rider's seat. Next, unclip the battery retaining strap, disconnect both terminals starting with the negative, and extract the battery from its housing.

At this point, simply insert the replacement and reassemble everything by following the reverse procedure.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Battery Replacement on KTM RC 390
Battery Replacement on KTM RC 390
Rc 390 In this tutorial, you will learn how to remove and replace the battery on a KTM RC 390. First, remove the rider's seat and pull the lever to release …
How to replace the battery in the KTM RC 390?
How to replace the battery in the KTM RC 390?
Rc 390 In this tutorial, you will see how to replace the battery in the KTM RC 390, a very simple and quick operation. First, ensure that the instrument clu…
How to Replace the Battery in a KTM RC 390
How to Replace the Battery in a KTM RC 390
Rc 390 .. This tutorial shows how to replace the battery in a KTM RC 390, a very simple and quick task. First, ensure the key is not.. …

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos