Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fork Seals on a KTM XC-W 300

Model: Ktm Xc W 300

Video tutorial

Below are the steps to remove and replace the fork seals on the KTM XC-W 300 enduro bike. First, remove the front wheel by unscrewing the wheel's central axle.

Then, unscrew the top nuts of the fork stanchions to slide them out, as shown in the video. At this point, remove the old seals and drain the fork oil into a container, replacing everything with new seals and new oil. Finally, reassemble the forks and adjust them!


Updated on 29 September 2026 by ScegliAuto


Related tutorials

Xc W 300 .. To remove the engine from the KTM XC-W 300, loosen the bolts that secure it to its housing in the centre of the frame: once the support bolts.. …
Xc W 300 .. In order to replace the piston of the KTM XC-W 300, you need to loosen the screws that hold the cylinder to the top of the engine block: before doing.. …
Xc W 300 .. replace the rear suspension spring on the KTM XC-W 300 enduro bike. First, place the bike on a stand and disconnect the suspension from the bottom by.. …

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos