Do it yourself
| ||||
|
Model: Ktm Xc W 300
Today's guide will show us how to disassemble and replace the rear suspension spring of the KTM XC-W 300 enduro motorcycle. First, we put the stand and start disconnecting our suspension from the lower part by unscrewing the fixing bolt; in the same way, we will disconnect it from the upper part of the suspension, as shown in the video. At this point, we compress the spring and then remove it and replace it on the suspension; we then install the new spring and reassemble the suspension on the motorcycle frame, applying the reverse process for reassembly!
Posted on 10 October 2023 by ScegliAuto
|
How do you adjust the carburetor solenoid on the Gilera DNA 50?In order to adjust the carburetor solenoid on the Gilera DNA 50, first you need to remove the solenoid from its housing: this will be accessible from the bottom of the motorcycle, just below the rear fender and in correspondence with the rear swingarm. The solenoid can be removed from its housing by loosening the screws that hold it in place and also disconnecting the connector: by doing this, it will be possible to adjust its intensity following the instructions shown in the video. After the adjustment, you can mount the solenoid back, making sure that everything works properly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |