Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of the KTM SX-F 350?

Model: Ktm Sx F 350
Part: Engine oil

Video tutorial

To change the engine oil of the KTM SX-F 350, loosen the drain plug located at the bottom centre of the bike. Once this plug is removed, collect all the used oil in a suitably positioned container.

The oil filter is also located at the lower side and should be removed from its housing and replaced with a new spare part; after replacement, top up by adding the necessary amount of oil through the breather on the right side of the bike.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Replace the Engine Oil and Oil Filter of the Ktm SX-F 350
Replace the Engine Oil and Oil Filter of the Ktm SX-F 350
Sx F 350 .. the routine maintenance service on the Ktm SX-F 350 enduro bike. First, remove the oil drain bolt located under the engine and allow the oil to drain.. …
How do you disassemble the engine of the KTM SX-F 350?
How do you disassemble the engine of the KTM SX-F 350?
Sx F 350 .. To disassemble the engine of the KTM SX-F 350, you need to loosen the screws that secure the engine block to its housing in the center of the.. …
How to Replace the Water Pump on the KTM SX-F 350
How to Replace the Water Pump on the KTM SX-F 350
Sx F 350 .. and replace the water pump on the KTM SX-F 350 enduro bike. First, place the bike on a stand and start draining the engine coolant by disconnecting.. …

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos