Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Oil in the Kymco Super 8 125

Model: Kymco Super 8 125
Part: Transmission fluid

Video tutorial

Today’s procedure will show you how to replace the transmission oil in the Kymco Super 8 125 scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain screw located under the transmission, allowing the oil to drain into a container for about ten minutes; then unscrew the fill cap located at the top to let the oil flow out more quickly.

Now, top up with the new transmission oil of the correct type (as specified in the user and maintenance manual), pouring in the right amount!


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Replace the Variator on the Kymco Super 8 125?
How to Replace the Variator on the Kymco Super 8 125?
Super 8 125 To replace the variator on the Kymco Super 8 125, loosen the screws that secure the transmission cover located on the left side of the scooter near t…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 To replace the air filter on a Kymco Super 8 125, loosen the screws securing the cover on the left side of the bike, near the rear wheel and above th…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos