Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will explain how to replace the headlight bulb of the Kymco Agility 125 scooter. To replace the bulb, we must first remove the front bumper; to remove the bumper, we must unscrew the screws along the entire edge. Once the bumper is removed, we can remove the light cover to disconnect the bulb from the connector to replace it. After installing the new bulb, we can connect it to the connector and close the bumper, which will be secured with the screws previously removed. After replacing the bulb, we can turn on the scooter lights to check the headlight operation.

Posted on 12 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
Agility 125 Today, see the instructions that will allow you to remove and replace the diaphragm of the carburettor on the Kymco Agility 125 scooter. First, place…
In the Kymco Agility 125, where are the fuses located?
In the Kymco Agility 125, where are the fuses located?
Agility 125 The Kymco Agility 125 scooter is very similar to the majority of scooters on the market, as it has a battery and fuse arrangement under the footboard…
How do you replace the front brake pads of the Kymco Agility 125?
How do you replace the front brake pads of the Kymco Agility 125?
Agility 125 In order to replace the front brake pads of the Kymco Agility 125, you will need to loosen the screws that secure the brake caliper to the correspond…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos