Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550

In this guide, we will see the instructions that will allow us to disassemble and replace the pulley of the Aprilia AK 550 scooter. First, we place the scooter on the center stand and begin to unscrew the fastening screws found on the side of the transmission cover in order to remove it. Next, we will unscrew the central nut of the fan to remove it, as shown in the video. At this point, we remove the pulley and the drive belt, replacing the components with new ones if necessary; we then reassemble the transmission elements, following the video tutorial until the end!

Posted on 15 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Battery replacement for Kymco AK 550
Battery replacement for Kymco AK 550
Ak 550 Today's instructions will show us how to disassemble and replace the battery of the Kymco AK 550 scooter, following these simple steps. First, we put…
How to replace the spark plug of the Kymco AK 550
How to replace the spark plug of the Kymco AK 550
Ak 550 Today we will discover the steps that will allow us to disassemble and replace the spark plug of the engine of the Kymco AK 550 scooter. First of all…
How to Change the Engine Oil on the Kymco AK 550
Ak 550 Today, we will learn how to perform the routine maintenance service by changing the engine oil on the Kymco AK 550 scooter. First, place your scooter…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos