Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Ak 550
Part: Air filter

To replace the air filter on the Kymco AK 550, you need to remove the plastic panel located between the steering wheel and the fuel filler cap. To remove it, unscrew the two Torx screws found at its base and detach the upper panels. Once the plastic panel is removed, there will be another panel secured by five screws underneath. After these screws are removed, you will have access to the air filter, which can be pulled out of its housing and replaced. Finally, reassemble all the previously removed parts.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ak 550 To replace the air filter on a Kymco AK 550, remove the plastic panel located between the handlebars and the fuel filler cap. To do this, unscrew the…
Ak 550 To replace the air filter on a Kymco AK 550, you need to remove the plastic panel located between the steering column and the fuel filler cap. To do …
Ak 550 .. In this tutorial, we will see how to replace the air filter on the Kymco AK 550 scooter, a very simple and quick operation to be performed.. …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos