Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to disassemble and replace the fuel filter on the Kymco Agility 125 scooter by following these simple steps. First, open and lift the seat of your scooter and start by removing the helmet compartment; to do this, unscrew all the fixing screws found inside the holes using Torx and socket keys. Once the compartment is removed, disconnect the fuel filter from the pipe to replace it with the new one; then reassemble everything by applying the reverse procedure of disassembly!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
Agility 125 Follow these instructions to remove and replace the air filter and change the engine oil of the Kymco Agility 125 scooter. First, place your scooter …
Replacing the Air Filter on a Kymco Agility City 125
Replacing the Air Filter on a Kymco Agility City 125
Agility 125 In today's video tutorial, you will learn how to remove and replace the air filter on a Kymco Agility City 125 scooter. First, locate the air filter …
How to Set the Time on the Kymco Agility 125
Agility 125 In this guide for your Kymco Agility 125, discover how to manually set the time using the buttons on the central display. First, position your Agilit…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos