Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery of the Kymco AK 550

Model: Kymco Ak 550
Part: Battery

Video tutorial

To access the battery of the Kymco AK 550, remove the rivets securing the windscreen supports and the screws located beneath them. This will allow you to completely remove the windscreen; next, loosen the bolts securing the front fairing.

These are located at the front, inside where the instrument panel is, and on the sides. At this point, the front fairing can be fully removed, granting access to the battery, which can then be replaced.

After replacing the battery, reassemble all previously removed parts.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Ak 550 To replace the battery in the Kymco AK 550, loosen the screws securing the front fairing of the bike, just below the windscreen. Once this plastic pa…
Ak 550 To replace the battery of the Kymco AK 550 remote control, pry open the top part of the device so that the two halves of the remote can be separated.…
Ak 550 To replace the battery of the Kymco AK 550 remote control, you will need to pry open the top part of the device so that the remote shell can be opene…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos