Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the front brake pads on a Kymco Super Dink 300, loosen the bolts securing the brake caliper to the disc so that it can be completely detached. Once the caliper is removed, you can slide out the old pads and insert two new ones. After the pads are installed, reposition the caliper onto the disc and secure it with the appropriate bolts. After installation, check that the brake functions correctly.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Kymco Super Dink 300 Scooter?
How to Replace the Rear Brake Pads on a Kymco Super Dink 300 Scooter?
Super Dink 300 In this tutorial, you will learn how to replace the rear brake pads on a Kymco Super Dink 300 scooter, a very simple and quick operation. First, ensu…
How to Replace the Headlight Bulb on a Kymco Super Dink 300
How to Replace the Headlight Bulb on a Kymco Super Dink 300
Super Dink 300 To replace the headlight bulb on the Kymco Super Dink 300, unscrew the screws and detach the internal clips that secure the front trim of the motorcy…
How do you reset the Service light of the Kymco Super Dink 300?
How do you reset the Service light of the Kymco Super Dink 300?
Super Dink 300 In order to reset the Service light on the Kymco Super Dink 300, you need to turn on the instrument panel by inserting the ignition key into the corr…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos