Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to replace the rear brake pads on a Kymco Super Dink 300 scooter, a very simple and quick operation. First, ensure that the exhaust is completely cold, then locate the two bolts securing the caliper and undo them using an 8 mm spanner. Once done, separate the caliper from the bracket, remove the old pads, and compress the piston using a clamp. At this point, clean any dirt residue, position the new parts, and follow the reverse procedure to reassemble everything.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Kymco Super Dink 300
How to Replace the Front Brake Pads on a Kymco Super Dink 300
Super Dink 300 To replace the front brake pads on a Kymco Super Dink 300, loosen the bolts securing the brake caliper to the disc so that it can be completely detac…
How to Change the Engine Oil on a Kymco Super Dink 300 Scooter
How to Change the Engine Oil on a Kymco Super Dink 300 Scooter
Super Dink 300 In this tutorial, learn how to change the engine oil on a Kymco Super Dink 300 scooter, a very simple and quick operation. First, wait until the engi…
How to Reset the Oil Service Light on a Kymco Super Dink 300?
How to Reset the Oil Service Light on a Kymco Super Dink 300?
Super Dink 300 To reset the Oil Service light on the Kymco Super Dink 300, turn the key to switch on the instrument cluster; once it is on, press the button located…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos