Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Kymco
  4. : Super Dink 300

Kymco Super Dink 300 - Videoguide

Kymco Super Dink 300
How do you reset the Oil Service light on the Kymco Super Dink 300?

The procedure to reset the Oil Service light on the Kymco Super Dink 300 is done by turning the key to turn on the instrument panel; once this is turned on, …read all…
Posted on 17 March 2024 by ScegliAuto
Kymco Super Dink 300
How to replace the rear brake pads on the Kymco Super Dink 300 scooter?

In this tutorial we can see how to replace the rear brake pads on the Kymco Super Dink 300 scooter, a very simple and fast operation. First of all, make sure …read all…
Posted on 18 May 2023 by ScegliAuto
Kymco Super Dink 300
How to replace the headlight bulb on Kymco Super Dink 300?

In order to replace the headlight bulb of the Kymco Super Dink 300 you have to unscrew the screws and unhook the internal fixing clips that block the front …read all…
Posted on 1 August 2022 by ScegliAuto
Kymco Super Dink 300
How do I reset the Oil Service light on the Kymco Super Dink 300?

In order to reset the Oil Service warning light on the Kymco Super Dink 300 you have to turn the key to turn on the instrument panel; once this has been turned …read all…
Posted on 16 April 2022 by ScegliAuto
Kymco Super Dink 300
How to replace the front brake pads of the Kymco Super Dink 300?

In order to replace the front brake pads of the Kymco Super Dink 300 it is necessary to loosen the bolts that fix the brake caliper to the special disc, so …read all…
Posted on 16 April 2022 by ScegliAuto
Checks and maintenance (2) Headlight bulb (1) Brake pads (2)

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos