Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Kymco Super Dink 300?

Model: Kymco Super Dink 300
Part: Service warning light

Video tutorial

In order to reset the Service light on the Kymco Super Dink 300, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is turned on, you can press the ADJ button repeatedly until you reach "Trip A". In this way, you can hold down the ADJ and MODE buttons simultaneously: after a few seconds of holding down the buttons, you can release them and notice that the light has turned off. Once the operation is complete, you can turn off the instrument panel.


Posted on 13 August 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Kymco Super Dink 300
How to Reset the Oil Service Light on the Kymco Super Dink 300
Super Dink 300 To reset the Oil Service light on the Kymco Super Dink 300, turn the key to switch on the instrument panel. Once it is powered on, press the button o…
How to Reset the Oil Service Light on a Kymco Super Dink 300?
How to Reset the Oil Service Light on a Kymco Super Dink 300?
Super Dink 300 To reset the Oil Service light on the Kymco Super Dink 300, turn the key to switch on the instrument cluster; once it is on, press the button located…
How to Replace the Headlight Bulb on a Kymco Super Dink 300
How to Replace the Headlight Bulb on a Kymco Super Dink 300
Super Dink 300 To replace the headlight bulb on the Kymco Super Dink 300, unscrew the screws and detach the internal clips that secure the front trim of the motorcy…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos