Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, discover the step-by-step instructions to perform the routine maintenance oil change on the Kymco Xciting 400i scooter by following these simple steps. First, place the scooter on its centre stand and start by removing the oil drain bolt located under the engine, using a 17 mm socket spanner; allow the oil to drain into a container for about ten minutes. Next, unscrew the oil filter cover screw using a 24 mm socket spanner; replace the filter with a new one and pour in the new oil!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement for Kymco Xciting S 400
Engine Oil and Oil Filter Replacement for Kymco Xciting S 400
Xciting S 400i Today, discover the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Kymco Xciting …
How to Change the Engine Oil on Kymco Xciting S 400i?
How to Change the Engine Oil on Kymco Xciting S 400i?
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, first unscrew the oil drain plug located at the central lower part of the bike: this will allow…
How do you change the transmission oil of the Kymco Xciting S 400i?
Xciting S 400i The oil in the transmission of the Kymco Xciting S 400i can be replaced after the transmission has been removed. To do this, you will need to loosen …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos