Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Oil of the Kymco Xciting S 400i

Model: Kymco Xciting S 400i
Part: Transmission fluid

Video tutorial

In this guide, follow the main instructions to replace the gearbox oil of the Kymco Xciting S 400i scooter. First, place your scooter on the centre stand and start unscrewing the oil drain bolt; use a socket spanner to let the oil drain into a container for about ten minutes.

Next, unscrew the filler cap and pour in the new gearbox oil; measure the correct amount of oil (approximately 250 ml should fit), following the video until the end!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How do you change the transmission oil of the Kymco Xciting S 400i?
Xciting S 400i The oil in the transmission of the Kymco Xciting S 400i can be replaced after the transmission has been removed. To do this, you will need to loosen …
Disassembly and replacement of the variator on the Kymco Xciting S 400i
Disassembly and replacement of the variator on the Kymco Xciting S 400i
Xciting S 400i This guide outlines the necessary steps for disassembling and replacing the variator on the Kymco Xciting S 400i scooter. First, place the scooter on…
How to Change the Engine Oil on the Kymco Xciting S 400i
How to Change the Engine Oil on the Kymco Xciting S 400i
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you t…

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos