|
Do it yourself
| |||
| ||||
Model: Kymco Ak 550
To replace the variator on the Kymco AK 550, loosen the screws securing the panel near the footrest and the side close to the exhaust. Once this panel is removed, you will be able to locate the transmission cover underneath. This needs to be opened by unscrewing the fastening screws; this way, the clutch and variator inside can be removed by unscrewing the nut that secures their central pin. At this point, you can insert the new variator, reassembling all the removed parts.
Updated on 16 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ak 550
In order to replace the transmission of the Kymco AK 550, you need to loosen the screws that secure the casing located on the right side of the motor…
Ak 550
To replace the exhaust of the Kymco AK 550, you need to loosen the screws that secure the exhaust tip to its housing, located near the rear wheel on …
Ak 550
It will be possible to perform the oil replacement of the Kymco AK 550 by loosening the drain plug of the oil pan, which will be located in the centr…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |