Do it yourself
Frequently asked questions about cars and motorcycles
It will be possible to completely replace the coolant of the Kymco AK 550 by unscrewing the drain plug of the tank located at the front lower part of the motorcycle, immediately behind the corresponding wheel: once this plug is removed, all the liquid inside the tank can flow out and be collected in a container. At this point, it will be possible to top up with the necessary amount of liquid from the same vent: a plunger can be used to push the liquid inside until the tank is filled.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Ak 550 To replace the battery of the Kymco AK 550, loosen the screws securing the windscreen at the front of the bike and remove it. Once the windscreen is …
Ak 550 To replace the battery in the Kymco AK 550, loosen the screws securing the front fairing of the bike, just below the windscreen. Once this plastic pa…
Ak 550 To replace the exhaust of the Kymco AK 550, you need to loosen the screws that secure the exhaust tip to its housing, located near the rear wheel on …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos