Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550
Part: Battery

To replace the battery on a Kymco AK 550, you need to loosen the screws that secure the front fairing of the bike, located just below the windscreen. The screws for this fairing will be found on the inside, just above the handlebars. Once the screws for this panel are loosened, you can completely detach it and access the battery underneath; the battery can then be removed from its location by disconnecting the cables and loosening the screws. At this point, you can insert the new battery and cover everything back up with the panel.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in the Kymco AK 550?
How to Replace the Battery in the Kymco AK 550?
Ak 550 To replace the battery in the Kymco AK 550, loosen the screws securing the front fairing of the bike, just below the windscreen. Once this plastic pa…
How do you replace the battery of the Kymco AK 550 remote control?
How do you replace the battery of the Kymco AK 550 remote control?
Ak 550 In order to replace the battery of the Kymco AK 550 remote control, you need to pry at the top of the device so that you can separate the two halves …
How do you replace the battery in the remote control of the Kymco AK 550?
How do you replace the battery in the remote control of the Kymco AK 550?
Ak 550 To replace the battery of the Kymco AK 550 remote control, you will need to pry open the top part of the device so that the remote shell can be opene…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos