Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lada
    3. :
  3. Kalina
    4. : 2004-2013 (MK 1)

Lada Kalina Years 2004-2013 (MK 1)

Lada Kalina (2004-2013 / MK 1)
How to Replace the Headlight Bulb on a Lada Kalina
To replace the headlight bulb on a Lada Kalina, open the hood to access the components in the engine compartment. Locate the protective cover of the …Read all…
Posted on 19 August 2026 by ScegliAuto
Lada Kalina (2004-2013 / MK 1)
How to Replace the Rear Headlight Bulbs on the Lada Kalina
Here are the steps to disassemble and replace the rear headlight bulbs on the Lada Kalina, following the instructions below. First, open the trunk hatch and …Read all…
Posted on 24 July 2026 by ScegliAuto
Lada Kalina (2004-2013 / MK 1)
How to Change the Engine Oil and Oil Filter in a Lada Kalina
Let's discover how to change the engine oil and oil filter in a Lada Kalina by following the instructions below. First, lift the vehicle and start loosening …Read all…
Posted on 15 July 2026 by ScegliAuto
Lada Kalina (2004-2013 / MK 1)
How to replace the windshield wiper motor on the Lada Kalina?
To replace the windshield wiper motor on the Lada Kalina, lift the hood to access the plastic panel at the base of the windshield. The wiper motor is located …Read all…
Posted on 13 July 2026 by ScegliAuto
Lada Kalina (2004-2013 / MK 1)
How to Replace the Low Beam Bulbs in a Lada Kalina?
In this tutorial, you will see how to replace the low beam bulbs in a Lada Kalina. First, ensure that the key is not in the ignition for safety. Then, open the …Read all…
Posted on 8 July 2026 by ScegliAuto
Shocks (1) Battery (1) Body (1) Air filter (2) Cabin air filter (1) Headlight bulb (4) Tail light bulb (1) Engine oil (1) Brake pads (1) Windshield wipers (1) Blower motor (1)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos