Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on the Lada Kalina

Model: Lada Kalina MK 1 - Years 2004-2013
Part: Tail light bulb

Here are the steps to disassemble and replace the rear headlight bulbs on the Lada Kalina, following the instructions below. First, open the trunk hatch and begin unscrewing and removing the screws located on the back of the light assembly; then, pull the headlight out from the outside, disconnecting the connectors along with the bulbs, as shown in the video. At this point, replace the burnt-out bulbs with new ones of the correct type and with the same base; then reassemble the rear headlight by following the reverse procedure!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb of the Lada Kalina?
How to Replace the Headlight Bulb of the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) To replace the headlight bulb of the Lada Kalina, open the hood to access the back of the corresponding headlight. You will find a circular plastic c…
How to Replace the Headlight Bulb on a Lada Kalina?
How to Replace the Headlight Bulb on a Lada Kalina?
Lada Kalina (2013-2018 / MK 2) To replace the headlight bulb on a Lada Kalina, open the hood to access the components inside the engine compartment. Specifically, you need to reach…
How to Replace the Headlight Bulb on a Lada Kalina
How to Replace the Headlight Bulb on a Lada Kalina
Lada Kalina (2004-2013 / MK 1) To replace the headlight bulb on a Lada Kalina, open the hood to access the components in the engine compartment. Locate the protective cover of the …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos