Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Lada Kalina?

Model: Lada Kalina MK 2 - Years 2013-2018
Part: Cabin air filter

In this tutorial we can see how to replace the cabin filter in the Lada Kalina, a very simple operation. We start by removing the caps of the protection strip placed in front of the windshield, then we unscrew the screws inside the holes, lift the wipers and move the left part of the strip. Then open the cover by unscrewing the two fixing screws, remove it and extract the old filter. At this point we can clean the inside of the housing from any residue, insert the spare part in the right direction and reassemble everything by following the reverse procedure.

Posted on 28 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Lada Kalina?
How to replace the air filter in the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) Replacing the air filter in the Lada Kalina is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we w…
How to replace the cabin fan of the Lada Kalina?
How to replace the cabin fan of the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) To replace the cabin fan of the Lada Kalina, you need to open the glove compartment on the passenger side, so that you can unscrew its internal fixin…
How to replace the engine oil and oil filter of the Lada Kalina
How to replace the engine oil and oil filter of the Lada Kalina
Lada Kalina (2004-2013 / MK 1) Let's find out how to replace the Lada Kalina engine oil and oil filter by following the instructions below. First of all we lift the car and start u…

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos