Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Leather Gaiter of the Gear Lever on a Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Shifter boot

Want to replace the leather gaiter located under the gear knob of a Lancia Delta? Watch this video to see how. First, remove the plastic trim around the gear lever using a screwdriver or lever, then undo the gear knob with a socket or spanner. Remove the leather gaiter (plastic securing frame) from the edge of the centre tunnel using a plastic lever, disconnect the power cable. To assemble: take the gaiter and insert it onto the rod present on the centre tunnel with the securing frame, then fit the new gear knob and tighten it with the socket. Finally, attach the plastic trim onto the gear knob.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Lancia Delta 3 located?
Where is the fuse box of the Lancia Delta 3 located?
Lancia Delta (2008-2014 / MK 3) In this new mini guide we will discover where the box containing all the various fuses inside your Lancia Delta Mk3 is located. First of all, the veh…
Where is the Fuse Box on the Lancia Delta 3?
Where is the Fuse Box on the Lancia Delta 3?
Lancia Delta (2008-2014 / MK 3) If you own a third-generation Lancia Delta (2008-2014) and want to find out where the fuse box is located, simply read the following instructions car…
Replacing the Radiator Fluid on a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Replacing the radiator fluid on a Lancia Delta? Lift the car to access the drain plug for the radiator fluid. Open the radiator hose and drain the ru…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos