Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Selectronic Gear Knob on a Lancia

Model: Lancia Delta MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Transmission

See other generations:
Video tutorial

Grip the lower part of the gear lever, the "silver ring", and pull it down while slightly rotating it. Next, move the lever to the central and left position, near the A/M symbol, and detach the knob by simply pulling it upwards. As you will understand, you will then need to forcefully push the new knob into place (applying pressure from above) and refit the lower clip, completing the replacement.

If you also want to remove the lower plastic cover, you will only need to pry it off from underneath, possibly using a small flat screwdriver or a plastic wedge.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replacing the Leather Gaiter of the Gear Lever on a Lancia Delta
Replacing the Leather Gaiter of the Gear Lever on a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Want to replace the leather gaiter located under the gear knob of a Lancia Delta? Watch this video to see how. First, remove the plastic trim around …
How to Replace the Automatic Gearbox Oil in the Lancia Delta 1.6 Multijet?
How to Replace the Automatic Gearbox Oil in the Lancia Delta 1.6 Multijet?
Lancia Delta (2008-2014 / MK 3) To replace the gearbox oil in the Lancia Delta, access the underside of the car and locate the drain plug of the gearbox. Open this plug and position…
How to Replace the Handle of a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Open the door and on the side of the panel, at the handle height, you will find a cap. Remove it, and there will be a Torx bolt. By loosening it slig…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos