Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Automatic Gearbox Oil in the Lancia Delta 1.6 Multijet?

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Transmission fluid

To replace the gearbox oil in the Lancia Delta, access the underside of the car and locate the drain plug of the gearbox. Open this plug and position a container underneath to collect all the used oil. Once the oil has completely drained, close the drain plug and proceed to top up. Access the engine bay, insert a tube into the filler hole, and connect the other end to a syringe: this way, you can add the necessary amount of oil.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the EGR Valve on the Lancia Delta 1.6 MultiJet
Lancia Delta (2008-2014 / MK 3) In this video tutorial, you will learn how to remove and clean the EGR valve on the 1.6 MultiJet engine of the Lancia Delta, following the instructio…
How to Remove Climate Control Controls on Lancia Delta
How to Remove Climate Control Controls on Lancia Delta
Lancia Delta (2008-2014 / MK 3) Demonstration video on how to remove the climate control panel. In this example, we have a 2008 Lancia Delta, but the process is simpler on other veh…
Where is the fuse box of the Lancia Delta 3 located?
Where is the fuse box of the Lancia Delta 3 located?
Lancia Delta (2008-2014 / MK 3) In this new mini guide we will discover where the box containing all the various fuses inside your Lancia Delta Mk3 is located. First of all, the veh…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos