Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the windshield wiper blades of the Lancia Ypsilon?

Model: Lancia Ypsilon MK 3, Y3, Ypsilon 3, 846 - Years 2011-2023
Part: Windshield wipers

In order to replace the windshield wiper blades of the Lancia Ypsilon, you will need to lift the arms to which the old ones are connected so that they are not in contact with the windshield: once this is done, you will need to tilt them relative to the arm so that the hook that connects them can be disengaged. Once the old blades are released from the corresponding arms, you can proceed to position the new ones so that they can be reconnected: then you will need to reposition them on the windshield to verify that they work correctly.

Posted on 25 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Lancia Ypsilon?
How to Replace the Wiper Blades on a Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To replace the wiper blades on a Lancia Ypsilon, lift the wiper arm so that the blade is not in contact with the windscreen. At this point, you will …
How to Change the Wiper Blades on a Lancia Ypsilon
How to Change the Wiper Blades on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Changing the wiper blades is a straightforward task that you can do independently, aided by our brief video tutorial. Start by lifting the existing w…
How to Replace the Wiper Arm on a Lancia Ypsilon
How to Replace the Wiper Arm on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To replace the wiper arm on a Lancia Ypsilon, use a screwdriver to remove the blade from the arm. By lowering the small levers in the connection betw…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos