Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
MK 2, 843, Ypsilon 2, Y2
- Years 2003-2011 In order to replace the Lancia Ypsilon wiper arm you have to use a screwdriver to remove the blade from the arm. By lowering small levers in the connection between the arm and the brush, the latter can be removed. Next, you will need to lift the plastic cover at the base of the arm and loosen the 10 nut that fixes the arm to the pin. Once the nut is loosened, the wiper arm can also be removed. At this point it will be possible to replace the pieces by installing a new arm to which the relative brush will then have to be fixed.
Posted on 28 February 2024 by ScegliAuto
How to replace the windshield wiper blades on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) To be able to replace the windshield wipers of the Lancia Ypsilon you have to lift the wiper arm so that the wiper blade does not come into contact w
How to change the windshield wiper blades of the Lancia Ypsilon.
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Replacing windshield wiper blades is a very simple operation that can be carried out completely independently, thanks also to the help of our short v
How to replace the rear wiper on Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / Y3, Ypsilon 3, 846, MK 3) In order to proceed with the replacement of the windscreen wiper blade (only the gasket and not the whole blade) it is necessary to proceed as follow Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |