Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Lancia
  4. :
  5. Ypsilon
  6. : How to replace the rear wiper on Lancia Ypsilon?

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y3, Ypsilon 3, 846, MK 3 - Years 2011-2023
Part: Windscreen wipers
Operation: How to replace the rear wiper on Lancia Ypsilon?

In order to proceed with the replacement of the windscreen wiper blade (only the gasket and not the whole blade) it is necessary to proceed as follows: first of all obtain a new gasket and then disassemble the blade by unhooking it from the rod. Then bend the gasket towards the center to release the rods that hold the gasket. Remove the rods and insert them into the profile of the new gasket, then cut the excess gasket to make it fit. Then reinsert the brush completed by the rods and reassemble it in the arm.


Posted on 2 December 2022 by ScegliAuto



How to replace the windshield wiper arm on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) In order to replace the Lancia Ypsilon wiper arm you have to use a screwdriver to remove the blade from the arm. By lowering small levers in the conn
How to replace the windshield wiper blades on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) To be able to replace the windshield wipers of the Lancia Ypsilon you have to lift the wiper arm so that the wiper blade does not come into contact w
How to disassemble the car radio of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Before we can begin, we will have to go and sit in the driver's seat of our Lancia Ypsilon. So let's start by inserting the special extractor keys in

    Frequently Asked Questions

    • Ypsilon 1996-2003 - What to do if the Lancia Ypsilon wiper does not work? Read Answer
    • Ypsilon 2003-2011 - What is and where is the windshield fuse on Lancia Ypsilon? Read Answer
    • Ypsilon 2003-2011 - How much does the Lancia Ypsilon wiper motor cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos