Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
MK 2, 843, Ypsilon 2, Y2
- Years 2003-2011 To be able to replace the windshield wipers of the Lancia Ypsilon you have to lift the wiper arm so that the wiper blade does not come into contact with the windshield. At this point, it will be necessary to lift the cover of the upper part of the pin that joins the brush to the arm: by lifting it, it will be possible to pull the brush back and remove it from its pin. Once the old brush has been removed, you will be able to insert the new one by pushing it forward and fixing it to the relative pin. By lowering the brush cover and positioning it on the windscreen, the operation will have been completed correctly.
Posted on 13 March 2024 by ScegliAuto
How to change the windshield wiper blades of the Lancia Ypsilon.
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Replacing windshield wiper blades is a very simple operation that can be carried out completely independently, thanks also to the help of our short v
How to replace the windshield wiper arm on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) In order to replace the Lancia Ypsilon wiper arm you have to use a screwdriver to remove the blade from the arm. By lowering small levers in the conn
How to replace the license plate light on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) In order to replace the Lancia Ypsilon license plate light, you need to use an object that acts as a lever to be able to disengage the glass cover of Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |