Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light of the Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Tail light

Today we will explain how to replace the rear light of the Lancia Delta. First, let's open the trunk and using an 8 mm Allen key, we unscrew the locking nut of the light. After that, we disconnect the connector and remove the light from its housing. To insert the light back into the housing, we need to follow the reverse procedure, so we connect the connector to the light and place it inside its housing. We screw in the locking nut and close the trunk to test the light's operation by turning on the lights. Before installing the new light, it is necessary to insert the bulbs.

Posted on 9 January 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Steering Wheel of the Lancia Delta
How to Remove the Steering Wheel of the Lancia Delta
Lancia Delta (2008-2014 / MK 3) Removing the steering wheel of the Lancia Delta? Follow these steps to disassemble the airbag and steering wheel. Insert the removal key into the slo…
How to Remove the Rear Light from a Lancia Delta
How to Remove the Rear Light from a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Before you start, exit the cabin of your Lancia Delta and head to the lower rear side of the vehicle. Begin by unclipping and removing the rear light…
Where is the fuse box of the Lancia Delta 3 located?
Where is the fuse box of the Lancia Delta 3 located?
Lancia Delta (2008-2014 / MK 3) In this new mini guide we will discover where the box containing all the various fuses inside your Lancia Delta Mk3 is located. First of all, the veh…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos