|
Do it yourself
| |||
| ||||
How to Install a Reversing Camera on a Lancia Ypsilon MK2
Model: Lancia Ypsilon
843, MK 2, Ypsilon 2, Y2
- Years 2003-2011
To install a reversing camera on a Lancia Y (second series), after removing the original radio, run the cable from the dashboard to the boot. Remove the glove compartment (three screws on top and three on the bottom), and using an electrician's probe, feed the cable down to the scuff plate, which needs to be removed to run the wire along existing channels. From the boot, run the cable up along the tailgate seal, passing through the grommet to enter the tailgate itself. The camera (available on Amazon with code B0F8QDGCR2 for £34.99 with free delivery for Prime customers) should be mounted above the number plate, removing the black plastic and bolts. For power, connect the red wire to the positive of the reversing light (white wire) and the black to the negative (black wire), using crimp connectors. If the video cable (RCA) is too short, extend it with an additional cable and a female-to-female adapter. Once everything is connected, engaging reverse will automatically switch the radio to the camera view; disengaging it will return to normal mode.
Posted on 10 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Lancia Ypsilon
(2003-2011 /
843, MK 2, Ypsilon 2, Y2)
How do you fit a rear bumper on a Lancia Ypsilon? Let's see how to proceed; it's not too complex if done methodically. First, grab the bumper and pos…
Lancia Ypsilon
(2003-2011 /
843, MK 2, Ypsilon 2, Y2)
Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
Lancia Ypsilon
(2003-2011 /
843, MK 2, Ypsilon 2, Y2)
The video in this article shows the diagram of all the fuses in your Lancia Ypsilon. Fuses are electrical devices designed to prevent damage to the v…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |