Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Lancia Y

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Car stereo

In today's tutorial video, see how to easily remove the radio from a second series Lancia Ypsilon. First, get inside the car and obtain the appropriate extractors to insert into the four holes. Then, pull firmly towards you to extract it. After that, simply remove the tools and disconnect the electrical connectors at the back and the antenna cable. For reassembly, just reinsert the radio without any tools until it clicks into its original position, as shown in the video.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
How to Remove the Car Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you start, sit in the front passenger seat of your Lancia Ypsilon. Begin by inserting the extraction keys into the holes located on the front …
How to Remove the Radio from a Lancia Ypsilon?
How to Remove the Radio from a Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you start, sit in the driver's seat of your Lancia Ypsilon. Begin by inserting the extraction keys into the designated holes on the front of t…

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Where is the blue & me control unit located in the Lancia Ypsilon? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos