Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Lancia Ypsilon

Model: Lancia Ypsilon MK 3, Y3, Ypsilon 3, 846 - Years 2011-2023
Part: Tail light

To begin, open the rear hatch of your Lancia Ypsilon to access the screws securing the rear light to the car. Start by unscrewing and removing these screws. Next, unclip the light from the car. Once you have unclipped the light from its housing, pull it away just enough to disconnect the rear connectors. After disconnecting the rear connectors, you can remove the light from the car, completing the removal process.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulbs of the Lancia Ypsilon.
How to replace the rear light bulbs of the Lancia Ypsilon.
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In this guide, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Lancia Ypsilon. First, l…
How to Remove the Rear Bumper from a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) Before you can start, open the boot of your Lancia Ypsilon. Begin by removing the rear lights by unscrewing and removing the fixing screws, then pull…
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a second series Lancia Ypsilon. First, open and lift the bonne…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos