Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Lancia Ypsilon

Model: Lancia Ypsilon MK 3, Y3, Ypsilon 3, 846 - Years 2011-2023
Part: Rear bumper

Before you can start, open the boot of your Lancia Ypsilon. Begin by removing the rear lights by unscrewing and removing the fixing screws, then pull out the lights and disconnect the respective electrical connectors. Next, unscrew and remove the screws and bolts that secure the bumper, located around the entire perimeter. At this point, unclip and remove the bumper from its housing. Once you have completed this step, you will have successfully removed the bumper.

Updated on 5 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Rear Bumper on the Lancia Ypsilon
How to Remove the Rear Bumper on the Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) If you need to replace the rear bumper on this vehicle because it may have been damaged in an accident, follow the instructions below and refer to th…
How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
What is the Fuse Diagram and Where is the Fuse Box on a Lancia Ypsilon?
What is the Fuse Diagram and Where is the Fuse Box on a Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) The video in this article shows the diagram of all the fuses in your Lancia Ypsilon. Fuses are electrical devices designed to prevent damage to the v…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos