Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Rear Bumper on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Rear bumper

See other generations:
Video tutorial

How do you fit a rear bumper on a Lancia Ypsilon? Let's see how to proceed; it's not too complex if done methodically. First, grab the bumper and position it perfectly on the body of the vehicle.

Then, using a socket wrench, screw in the securing bolts located at the front of the bumper. Next, start screwing in the bolts around the wheel arch liners.

After tightening the bolts around the bumper, secure the bolts underneath the vehicle, between the chassis and the bumper. Finally, check the correct fitting of the bumper in all its parts.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Fitting Parking Sensors on Our Lancia Ypsilon
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) Want to fit parking sensors on your Lancia Ypsilon? Follow this guide to install the parking sensors effectively. First, take measurements with a tap…
How to Remove the Rear Bumper from a Lancia Ypsilon
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) Before you can start, open the boot of your Lancia Ypsilon. Begin by removing the rear lights by unscrewing and removing the fixing screws, then pull…
How to Remove the Rear Bumper on the Lancia Ypsilon
How to Remove the Rear Bumper on the Lancia Ypsilon
Lancia Ypsilon (1996-2003 / 840, Y1, Ypsilon 1, MK 1) If you need to replace the rear bumper on this vehicle because it may have been damaged in an accident, follow the instructions below and refer to th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos