Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to repair the window regulator button on Lancia Y

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon MK 2, 843, Ypsilon 2, Y2 - Years 2003-2011
Part: Window lift button
Operation: How to repair the window regulator button on Lancia Y

In this short video we will see how to replace the buttons on the Lancia Ypsilon power window control unit. Spare parts are readily available and the operation is not very complex but requires a bit of manual dexterity. Using a plastic lever we unhook the push-button panel from the door and disconnect the electrical connectors. Using a small slotted screwdriver, we carefully unclip the upper part of the panel, remove the damaged buttons and install the new buttons, fitting them carefully. Finally, we close the push button panel, connect the connectors and check that it works correctly before reassembling it in the door panel.


Posted on 17 January 2024 by ScegliAuto



How to replace the windshield wiper linkage of the Lancia Ypsilon.
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) To replace the power window button, we first need to remove the hood by unscrewing the locking screw and then disassembling the lower part where the
How to replace the door and other parts on a Lancia Ypsilon with recycled parts.
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) In this video, we see how to replace damaged parts of a Lancia Ypsilon. In the video, they are repaired parts, but in our case, they can easily be pa
How to replace the window switch on the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) In order to replace the window switch on the Lancia Ypsilon, a screwdriver must be used to pry into the housing of the push button panel. By levering

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos