Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Linkage on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Windshield wipers

To replace the window lift switch, first remove the bonnet by unscrewing the securing screws, then disassemble the lower part where the window motor is located, as shown in the reference video. At this point, you can remove the motor. Detach the wiper arms, pull up the engine cover seal, unscrew the two screws securing the plastic cover, and remove it. Remove the two 10 mm bolts and take off the motor. The reference video also shows how to repair the motor if the fault is not severe; in this case, we simply added a screw. Reassemble the motor as shown during removal and replace the window lift switch. This operation is very simple; just use a flathead screwdriver to pry and remove the switch, disconnect the connector, and replace the switch with a new one.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Arm on a Lancia Ypsilon
How to Replace the Wiper Arm on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To replace the wiper arm on a Lancia Ypsilon, use a screwdriver to remove the blade from the arm. By lowering the small levers in the connection betw…
How do you replace the windshield wiper blades of the Lancia Ypsilon?
How do you replace the windshield wiper blades of the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In order to replace the windshield wiper blades of the Lancia Ypsilon, you will need to lift the arms to which the old ones are connected so that the…
How to Replace the Wiper Blades on a Lancia Ypsilon?
How to Replace the Wiper Blades on a Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To replace the wiper blades on a Lancia Ypsilon, lift the wiper arm so that the blade is not in contact with the windscreen. At this point, you will …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos