Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Window Regulator Installation for Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Power window motor

To replace the window regulator mechanism, first remove the door panel. Once removed, you will find another internal trim panel to which both the motor and the mechanism are attached. Before removing the motor and dismantling this panel, loosen the clips securing the glass to allow it to be removed and complete the disassembly. Proceed by removing the old mechanism and fitting the new one, tightening the relevant screws, and then insert and secure the motor after removing the clips. Reverse the process for reassembly.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair the Window Switch on Lancia Y
How to Repair the Window Switch on Lancia Y
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this short video, see how to replace the buttons on the window switch group of the Lancia Ypsilon. Replacement parts are easily available, and the…
How to Replace the Radio in a Lancia Ypsilon
How to Replace the Radio in a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In today's video, you will see how to remove the original radio from the second series Lancia Ypsilon. The next step will be to install the 2 DIN tou…
How to Replace the Boot Light Bulb on a Lancia Ypsilon
How to Replace the Boot Light Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To change the boot light bulb to a T10 LED bulb on the Lancia Ypsilon, use a flathead screwdriver to lever the clip at the bottom of the light lens t…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos