Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Car stereo

In today's video, you will see how to remove the original radio from the second series Lancia Ypsilon. The next step will be to install the 2 DIN touch screen radio. Before proceeding, gather the appropriate tools; if you have them, use the original extraction keys for the trim, otherwise, two hook tools will suffice. Insert them into the cavities of the radio and pull firmly towards you to extract it. Disconnect the power and radio connectors and remove the radio. Now you can proceed with the installation of the new radio, using the original housing and connectors.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
How to Remove the Car Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you start, sit in the front passenger seat of your Lancia Ypsilon. Begin by inserting the extraction keys into the holes located on the front …
How to Replace the Radio in a Lancia Ypsilon?
How to Replace the Radio in a Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) To replace the radio in a Lancia Ypsilon, extract the radio from its housing by simply pulling it out and disconnecting the connectors attached to it…

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Where is the blue & me control unit located in the Lancia Ypsilon? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos