Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Speaker on a Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Speaker

Before you start, open the rear door of your Lancia Delta. Begin by removing the door panel, disengaging and removing all the inserts, then unscrew and remove the fixing screws, and finally disengage the door panel itself and disconnect the relevant cables and electrical connectors. By doing this, you will reach the speaker. Next, unscrew and remove the screws that secure the speaker to its housing. At this point, extract the speaker and disconnect the relevant electrical connector, completing the removal. To fit the new speaker, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Door Panel of a Lancia Delta
Guide to Removing the Door Panel of a Lancia Delta
Lancia Delta (2008-2014 / MK 3) In this brief and simple guide, you will find the main instructions that will allow you to remove and replace the front door panel of the Lancia Delt…
Replacing speakers in Lancia Delta
Replacing speakers in Lancia Delta
Lancia Delta (2008-2014 / MK 3) Want to remove the damaged speaker from the door panel of a Lancia Delta? To access the speaker, you must remove the cover panel. Unscrew the screws …
How to replace the rear light of the Lancia Delta
Lancia Delta (2008-2014 / MK 3) Today we will explain how to replace the rear light of the Lancia Delta. First, let's open the trunk and using an 8 mm Allen key, we unscrew the lock…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos