Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Door Panel of a Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Door trim panel

In this brief and simple guide, you will find the main instructions that will allow you to remove and replace the front door panel of the Lancia Delta. First, open the front door and start unscrewing all the fastening screws located on the door panel; you will find them under various plastic caps and covers, as shown in the video. Now, pry on the sides of the panel to detach and remove it, disconnecting the handle release cable and the electrical connector for the window switch; all that’s left is to refit everything!

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing speakers in Lancia Delta
Replacing speakers in Lancia Delta
Lancia Delta (2008-2014 / MK 3) Want to remove the damaged speaker from the door panel of a Lancia Delta? To access the speaker, you must remove the cover panel. Unscrew the screws …
How to Replace the Rear Door Speaker on a Lancia Delta
How to Replace the Rear Door Speaker on a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Before you start, open the rear door of your Lancia Delta. Begin by removing the door panel, disengaging and removing all the inserts, then unscrew a…
How to Remove the Headlining of a Lancia Delta
Lancia Delta (2008-2014 / MK 3) How do you remove the headlining of a Lancia Delta? Start by removing the side handles of the headlining with a screwdriver, then take off the sun vi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos