Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Pump from the Lancia Delta

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Pump

In this guide, we will cover all the instructions needed to remove and replace the clutch pump or slave cylinder of the Lancia Delta. The clutch pump is located just behind the pedal and can be seen by pressing the pedal itself; first, proceed to remove the pedal. Next, lift the vehicle and disconnect the hydraulic lines from the clutch pump to remove it and replace it with the new one (with the original part); once the new pump is installed, it will be necessary to top up with new fluid, pressurising the hydraulic circuit.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Lancia Delta 3 located?
Where is the fuse box of the Lancia Delta 3 located?
Lancia Delta (2008-2014 / MK 3) In this new mini guide we will discover where the box containing all the various fuses inside your Lancia Delta Mk3 is located. First of all, the veh…
How to disassemble the Blue & Me control unit in the Lancia Delta?
How to disassemble the Blue & Me control unit in the Lancia Delta?
Lancia Delta (2008-2014 / MK 3) In this tutorial, we can see how to disassemble the Blue & Me control unit in the Lancia Delta, an extremely simple operation to perform, for example…
How to Remove and Clean the EGR Valve on the Lancia Delta 1.6 MultiJet
Lancia Delta (2008-2014 / MK 3) In this video tutorial, you will learn how to remove and clean the EGR valve on the 1.6 MultiJet engine of the Lancia Delta, following the instructio…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos