Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
Y2, 843, Ypsilon 2, MK 2
- Years 2003-2011 To replace the clutch on a car, the first thing to do is to lift it, putting us in safety in order to have access and room to maneuver from the underside of the vehicle. From the left side we start by removing the wheel and the relative axle shaft after having removed the shock absorber. At this point we will need a frame that will support the engine and gearbox. In this video we have built one in metal that can be placed on a trolley jack. After removing all the anchors we can remove the block so as to have access to the clutch unit and remove it in full autonomy.
Posted on 5 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |